教程：https://www.haibucuo.com/58709

抖音网红玩具木牛流马 CAD 3D打印

Summary This gripper is remixed of thing:2415 for this robotic arm, to assemble you need: 1 x Tower pro SG90s servo or compatible 7 x M3x18 screws 7 x M3 nuts, prefer nylock type 1 x M2x6 tapping scre…

This coupler is just what I neededfor our little Arduino projects. Thanks a lot for the Openscad file. As you explained, gaps should be adjusted depending on the printer and material.

【Lego compatible simple SG90 servo motor bracket】SG90サーボモーターを固定するためのシンプルなブラケットです。動作確認やテスト等でサーボを動かす時に便利となります。簡単に取り外しが可能でLEGO互換取り付け穴がありLEGOシリーズと組み合わせることも出来ます。 https://www.thingiverse.com/thing:4792383 【…

Summary I wanted to up my Lego game and combine my love for Legos and my love for radio control. This was created in the pursuit or a radio controlled car made of Legos, but soon became part of roboti…

https://www.thingiverse.com/thing:3137992

https://www.thingiverse.com/thing:2207054

ESP32 DevKit Case 3D打印外壳stl文件  

Arduino迷你雷达资料3D打印文件

6轴机械臂 结构简单，容易制作，颜值高。资料包含stl打印文件，step三维模型文件，aduino原代码，上位机。物料清单等。diy，或学习研究都是很好的素材。

28BYJ-48步进电机驱动手爪，末端机械柔性夹持器，3D打印制作，附STEP格式图纸  

Summary This is a 3D printed robotic arm The intent was to design something “easy” and cheap to built with a good visual impact also. Test video: https://youtu.be/qovZKW0DxWkhttps://youtu….

Summary The Mark VI Fin Gripper – Black Ram Hand. This hand was designed to use the The Fin Ray Effect giving the wearer the ability to pick up soft or odd shaped items not able to be grasped by…